Additional information
Weight | 15 g |
---|
£6.75
3D printed replacement final drive gear set (2 gears) to fit the Mainline Warship. You will notice the original Mainline final drive gear was a double gear. The smaller diameter gear is not used in the final drive application and so, for simplicity, we have omitted the smaller gear from our replacement.
Please note, these have been endurance tested without lubrication, please do not lubricate as the lubricant used may affect the material. Designed to be a push fit on the axle, Mainline did not provide either a positive location or spline to stop the gear rotating on the axle. Once the correct position of the gear on the axle has been determined, we recommend bonding in place with a small amount of super glue.
Weight | 15 g |
---|