3D Printed replacement Bachmann split chassis axle x 2
£3.103D printed replacement Bachmann split chassis locomotive axles only for those that do not want the replacement gear as well. This listing is for 2 axles.
Showing all 15 results
3D printed replacement Bachmann split chassis locomotive axles only for those that do not want the replacement gear as well. This listing is for 2 axles.
3D printed replacement final drive gear set (2 gears) to fit the Mainline Warship. You will notice the original Mainline final drive gear was a double gear. The smaller diameter gear is not used in the final drive application and so, for simplicity, we have omitted the smaller gear from our replacement.
Please note, these have been endurance tested without lubrication, please do not lubricate as the lubricant used may affect the material. Designed to be a push fit on the axle, Mainline did not provide either a positive location or spline to stop the gear rotating on the axle. Once the correct position of the gear on the axle has been determined, we recommend bonding in place with a small amount of super glue.
This listing is for 1 3D resin printed intermediate gear to fit the old Mainline Warship locomotive. It has been reverse engineered from an original gear. Price is for on gear, please check how many you need and order the correct quantity. There are 2 per locomotive. These are the gears that mesh with the final drive gear, not the one that meshes with the primary gear.
This listing is for 1 3D resin printed primary drive gear to fit the old Mainline or Replica Railways Peak locomotive. It has been reverse engineered from an original gear. Price is for on gear.
This listing is for 1 3D resin printed primary drive gear to fit the old Mainline Warship locomotive. It has been reverse engineered from an original gear. Price is for on gear.
This listing is for one, 3D resin printed, replacement final drive gear to fit an early Bachmann class 158 DMU. The unit has 4 final drive gears, if you wish to replace them all, you need to order a quantity of 4.
3D resin printed EM gauge conversion axles and gear kit for Bachmann split chassis steam locomotive with square axle drive, 14.7mm 28 tooth gear. Printed in our latest resin formulation for improved strength, use this kit to convert your loco from OO to EM gauge. Please note, this kit contains one final drive gear/axle and two plain axles. It does not include any axles for leading or trailing bogie wheels.
This listing is for a single 3D resin printed replacement intermediate gear to fit a Hornby T9. Part of item 16 (X9960) on the locomotive service sheet, the original is made of brass. You will need to re-use the original 2mm diameter shaft and smaller side gear from your locomotive.
If you need the small gear as well, we can supply this too.
This listing is for a single 3D resin printed replacement intermediate gear to fit a Hornby T9. Part of item 16 (X9960) on the locomotive service sheet. You will need to re-use the original 2mm diameter. This is 2 separate gears that become one combined gear when fitted onto your existing 2mm shaft.
This listing is for a single 3D resin printed replacement intermediate gear to fit a Hornby T9. Part of item 16 (X9960) on the locomotive service sheet. You will need to re-use the original 2mm diameter shaft and larger gear from your locomotive.
If you need the larger gear as well, we can supply this too.
This listing is for a pair of 3D printed replacement final drive gears for the Mainline Class 45 Peak.
This listing is for a pair of 3D printed replacement gears for the Mainline Class 45 Peak.
3D printed replacement axles and gear for the no longer available Bachmann J72 split chassis locomotives.
New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running.
These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle
Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly.
3D printed replacement axles and gear for the no longer available Bachmann split chassis steam locomotives.
New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running.
These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle
These axles were fitted to many different early Bachmann split chassis steam loco’s. We know they were fitted to V1, A4 and 43xx Mogul, but it is not possible to come up with a definitive list as there are so many variants. To check your loco, please remove and separate one wheel set. If the centre axle pin is square and approximately 2.05 x 2.05mm , the outer diameter of the gear is approximately 14.7mm and it has 28 teeth, these gears will fit.
For smaller 0-6-0 locos, please see our other listings.
Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly.
3D printed replacement axles and gear for the no longer available Bachmann split chassis steam locomotives.
New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running.
These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle
These axles were fitted to several different very early Bachmann split chassis steam loco’s.
Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly.