3D printed Railtrax British Rail logo 4mm scale
£1.90This 10mm long 1mm deep British Rail logo is 3D printed in resin and is ready to paint. We can make this sign any size you require, just message and ask.
Showing 1–16 of 29 results
3D Printed replacement final drive gears for Mainline Warship
£6.75
3D printed replacement final drive gear set (2 gears) to fit the Mainline Warship. Please note, these have been endurace tested without lubrcation, please do not lubricate as the lubricant used may affect the material. Designed to be a push fit on the axle, Mainline did not provide either a positive location or spline to stop the geat rotating on the axle. Once the correct position of the gear on the axle has been determined, we recommend bonding in place with a small amount of super glue.
4mm scale (OO, EM or P4 gauge) “SW” 3D printed sign
£1.50A 3D printed sign ready for painting by the customer showing the lettering “SW”.
4mm scale (OO, EM or P4 gauge) 3D printed “Whistle” sign
£1.75A 3D printed sign ready for painting by the customer with the wording “Whistle” on it.
4mm scale (OO, EM or P4 gauge) 3D resin printed iron railing posts
£2.00These 4mm scale (OO, EM or P4 gauge) 3D resin printed iron railing posts are printed with a 0.7mm hole through each ball to take a fine wire as a railing. Supplied in a strip of 5 ready for painting, the distance between the balls is 8mm (2 scale feet) and there is adequate material on the bottom of each post to insert into a hole in your baseboard. Add that additional realism to your model with the accurate scale model.
4mm scale (OO, EM or P4 gauge) British Rail era speed signs
£5.00Chose any 6 signs from 5mph to 125mph and with or without left or right direction arrows (please specify when ordering). These signs are supplied ready for painting by the customer. Now you can have exactly what speed signs you need for your layout.
4mm scale (OO, EM or P4 gauge) figures
£1.50People bring model railways to life, and yet manufacturers make every figure the same size and shape. We are not all the same, bring your railway to life with our life like figures. Tall, short, slim, muscular or just plain overweight. Available in a range of standing, sitting and running poses, we are adding more figures to the range daily and can make any figure to order, just tell us what you want. The price stated is per figure in 4mm scale, but we will be adding multiple figure packs in due course, so tell us what you want and we will add a listing to give you the best price available. Perhaps you want to add your family to your layout, or a model of a lost relative, we can make it.
4mm scale (OO, EM or P4 gauge) half height figures for populating your trains
£6.00Trains carry passengers, add these half height (top half) figures to your carriages to bring them to life. Price is for 10 characters.
4mm scale (OO, EM, P4 gauge) straight 3D printed Balustrade 75mm long
£4.253D resin printed straight Ballustrade in 4mm scale, suitable for OO, EM or P4 gauge model railways. Each section is 75mm in length ready for painting by the customer
4mm scale GWR style milepost – set of 4
£4.00A set of four bespoke GWR style mileposts 3D resin printed and unpainted. Chose the milepost you require and receive the full mile, quarter, half and three quarter milepost to go with it. Please specify the mileage required when ordering.
4mm scale, OO EM P4 gauge, Locomotive lamps (nonworking)
£2.50A strip of 5 non working 3D resin printed locomotive lamps ready for painting by the customer. Suitable for OO, EM and P4 gauges.
4mm scale, OO EM P4 gauge, station name board sign with up to 10 characters of your choice
£3.50A besoke station sign made to order with your station name (up to 10 characters either all CAPITALS or Lower Case). This sign is 48mm long and the legs are 40mm long.
4mm scale, OO EM P4 gauge, station name board sign with up to 13 characters of your choice
£4.50A besoke station sign made to order with your station name (up to 13 characters either all CAPITALS or Lower Case). This sign is 60mm long and the legs are 40mm long.
7mm scale GWR style milepost – set of 4
£7.50A set of 4 3D printed GWR style bespoke mileposts. Order the full mile and receive the quarter, half and three quarter mile posts as well. These signs are supplied unpainted. Please specify the mileage required when ordering. We can supply single, double and triple digit mileages to your requirements
GWR 16″ disc ground signals – 4mm scale
£6.003D printed GWR 16 inch disc ground signals – set of 6. These can be supplied set to danger, clear or as unassembled kits for anyone wishing to make them operational, the kit will comprise of the main body, disc with centre pin and the counterbalance weight. The user will need fine wire to attach the counterbalance to the main body and to attach the disc to the operating mechanism. Please specify required configuration when ordering. Default set where not specified will be 3 at danger and 3 at clear. The lamp unit on the side is hollow for anyone wishing to fit a 1.8mm diameter LED. This item requires painting.