A set of 5 brick faces for platforms. Each piece is 200mm long and can be linked together to form a 1000mm platform face. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 3 stepped layers at the top to take the plaform face. These can be used in conjunction with our platform face ramps and platform edge strips and can be cut to the required length to suit any platform length. 16.5mm tall to take our 1.5mm thick platform edges making the required 18mm platform height for code 100 track.
A set of 5 brick faces for platforms. Each piece is 200mm long and can be linked together to form a 1000mm platform face. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 2 stepped layers and a brick platform edge. These can be used in conjunction with our platform face ramps and can be cut to the required length to suit any platform length. 17.5mm tall making the required platform height for code 75 track.
3D printed replacement axles and gear Bachmann HO 2-10-4 Santa Fe loco with round axle drive. May fit other Bachmann HO locos.
Please note: It is not easy to set the wheel quartering with round axle drive pin locos and you will need to buy or make a jig to correctly quarter the wheel sets. Please do not purchase if you do not have the technical competence to complete the task.
3D printed replacement axles and gear for the no longer available Bachmann J72 split chassis locomotives.
New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running.
These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle. See our other
j72 listing for square drive version, this is the round drive version
Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly. As this is a round drive loco kit, you will need a jig to correctly quarter the wheel sets.
3D printed replacement axles and gear for the no longer available Bachmann J72 split chassis locomotives.
New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running.
These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle
Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly.
3D printed replacement axles and gear for the no longer available Bachmann split chassis steam locomotives.
New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running.
These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle
These axles were fitted to many different early Bachmann split chassis steam loco’s. We know they were fitted to V1, A4 and 43xx Mogul, but it is not possible to come up with a definitive list as there are so many variants. To check your loco, please remove and separate one wheel set. If the centre axle pin is square and approximately 2.05 x 2.05mm , the outer diameter of the gear is approximately 14.7mm and it has 28 teeth, these gears will fit.
For smaller 0-6-0 locos, please see our other listings.
Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly.
3D printed replacement axles and gear for the no longer available Bachmann split chassis steam locomotives.
New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running.
These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle
These axles were fitted to several different very early Bachmann split chassis steam loco’s.
Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly.
3D printed replacement final drive gear to fit a Heljan class 23. There are 4 final drive gears per loco, but these are also used as one of the intermediate gears in the gearbox meaning there are 8 in total in the loco. This listing is for a pair of gears, to replace the final drive gears on one bogie.
Due to workload pressures, we no longer have capacity to carry out besoke design or print work. We now only print and sell our own designs.
Customers outside the UK must add the International shipping charge, currently £10.75 to their basket before checkout. International customer can only pay by PayPal. Any non UK orders received without the international shipping charge paid will be cancelled and a cancellation fee to cover PayPal charges may be applied. We no longer ship to the USA. Any orders placed from the USA will be cancelled.
Mainline Class 45 (Peak) Intermediate drive gear
4mm scale (OO, EM or P4 gauge) 3D resin printed iron railing posts
3D Printed replacement final drive gears for Mainline Warship
Out Of Stock
