3D printed – “CORNISH RIVIERA EXPRESS” Headboard sign in 4mm scale – unpainted £3.00 3D printed unpainted headboard sign – 4mm. This sign is printed “CORNISH RIVIERA EXPRESS”. Other text and scales are available, please contact us to discuss your bespoke requirements. We can also make any design of sign you require, just email us (info@asis3d.co.uk) with a photo or dimensioned sketch of what you are looking for. Add to cart
Out Of Stock 3D printed coupling dropper / drawbar to fit Bachmann Mk 1 coaches £3.90 The NEM pocket on Bachmann Mk 1 coaches is too high and requires a stepped tension hook coupling. This limits the possibilities for other couplings such as KADEE couplings without some modification to either the coach or using a KEEN system drawbar, which is not perfect as the NEM coupling pocket is open and needs to be closed by glueing a piece of plasticard over the recess. These coupling dropper / drawbars overcome both the positional error of the NEM pocket, and have a fully formed NEM pocket, so pop them in and you can fit your choice of coupling straight in. Price is for a pair of droppers / drawbars. Details
Out Of Stock 3D printed coupling dropper / drawbar to fit Bachmann Mk 2 coaches £3.90 The NEM pocket on Bachmann Mk 2 coaches is too high and requires a stepped tension hook coupling. This limits the possibilities for other couplings such as KADEE couplings without some modification to either the coach or using a KEEN system drawbar, which is not perfect as the NEM coupling pocket is open and needs to be closed by glueing a piece of plasticard over the recess. These coupling dropper / drawbars overcome both the positional error of the NEM pocket, and have a fully formed NEM pocket, so pop them in and you can fit your choice of coupling straight in. Price is for a pair of droppers / drawbars. Details
3D Printed replacement Bachmann split chassis axle x 2 £3.10 3D printed replacement Bachmann split chassis locomotive axles only for those that do not want the replacement gear as well. This listing is for 2 axles. Add to cart
3D Printed replacement final drive gears for Mainline Warship £6.75 3D printed replacement final drive gear set (2 gears) to fit the Mainline Warship. You will notice the original Mainline final drive gear was a double gear. The smaller diameter gear is not used in the final drive application and so, for simplicity, we have omitted the smaller gear from our replacement. Please note, these have been endurance tested without lubrication, please do not lubricate as the lubricant used may affect the material. Designed to be a push fit on the axle, Mainline did not provide either a positive location or spline to stop the gear rotating on the axle. Once the correct position of the gear on the axle has been determined, we recommend bonding in place with a small amount of super glue. Add to cart
3D printed replacement for the Triang class 31 and 37 traction magnet £3.00 3D printed replacement for the Triang class 31 (A1A-A1A) and class 37 traction magnets. With nickel silver rails, the traction magnets no longer aid traction, and cause the wheel sets to pull over to one side. Replacing the magnets with our 3D resin printed alternatives will allow the locomotive to run with centred wheels, while maintaining the other function of the magnet, holding the armature bearings in place and allowing improved low speed running of these old locomotives. Price is for a pair. Add to cart
3D printed replacement for the Triang class 35 Hymek traction magnet £3.00 3D printed replacement for the Triang class 35 Hymek traction magnets. With nickel silver rails, the traction magnets no longer aid traction, and cause the wheel sets to pull over to one side. Replacing the magnets with our 3D resin printed alternatives will allow the locomotive to run with centred wheels, while maintaining the other function of the magnet, holding the armature bearings in place and allowing improved low speed running of these old locomotives. Price is for a pair. Add to cart
3D printed replacement intermediate drive gear for Mainline Warship £4.50 This listing is for 1 3D resin printed intermediate gear to fit the old Mainline Warship locomotive. It has been reverse engineered from an original gear. Price is for on gear, please check how many you need and order the correct quantity. There are 4 per locomotive. Add to cart
3D printed replacement primary drive gear for Mainline Peak £6.00 This listing is for 1 3D resin printed primary drive gear to fit the old Mainline or Replica Railways Peak locomotive. It has been reverse engineered from an original gear. Price is for on gear. Add to cart
3D printed replacement primary drive gear for Mainline Warship £6.00 This listing is for 1 3D resin printed primary drive gear to fit the old Mainline Warship locomotive. It has been reverse engineered from an original gear. Price is for on gear. Add to cart
3D printed replacement Tender Air vent to fit Lima Hughes Crab loco tender £1.50 3D printed Tender detailing part for a Lima LMS / BR Hughes Crab locomotive tender. This is the tender vent that is often missing from these older locos. The part measures 12mm long. Add to cart
3D printed station platform sack barrow – 7mm scale £6.00 3D printed unpainted fully assembled station platform sack barrow. Listing is for 2 sack barrows. Based on a GWR sack barrow, it is equally at home on a 1980’s diesel layout. Resin printed for super fine detail that injection moulded and white metal kits simply cannot compete with. Add to cart
3D printed Station Platform Trolley 4mm scale £4.50 Unpainted station platform trolley. No assembly required, listing is for 2 trolleys. 3D resin printed for extra fine detail which injection moulded and white metal kits simply cannot compete with. This trolley is based on a GWR trolley, but will also suit diesel era layouts up to and including the 1980’s. Add to cart
3D printed Station Platform Trolley 7mm scale £6.75 Unpainted station platform trolley. No assembly required, listing is for 2 trolleys. 3D resin printed for extra fine detail which injection moulded and white metal kits simply cannot compete with. This trolley is based on a GWR trolley, but will also suit diesel era layouts up to and including the 1980’s. Add to cart
3D Resin Printed Replacment Final Drive Gear to fit Bachmann Class 158 £2.50 This listing is for one, 3D resin printed, replacement final drive gear to fit an early Bachmann class 158 DMU. The unit has 4 final drive gears, if you wish to replace them all, you need to order a quantity of 4. Add to cart