Out Of Stock Hornby R3339 LMS 4-6-2 Coronation class locomotive number 6229 “Duchess of Hamilton” £140.00 Bran new boxed, only taken out to photograph. Hornby R3339 LMS 4-6-2 No 6229 “Duchess of Hamilton” Details
Hornby T9 – 3D printed replacement intermediate gear £4.50 This listing is for a single 3D resin printed replacement intermediate gear to fit a Hornby T9. Part of item 14 (X9960) on the locomotive service sheet, the original is made of brass. You will need to re-use the original 2mm diameter shaft and smaller side gear from your locomotive. Add to cart
Lima Class 52 Western – blue – renumbered and named as 1019 Western Challenger £30.00 Lima class 52 blue, originally 1071, renumbered and named to 1019 Western Challenger. Runs OK in both directions. Original box in reasonable condition considering its age. Add to cart
Lima Class 52 Western – blue – renumbered and named as 1062 Western Courier £30.00 Lima class 52 blue, originally 1071, renumbered and named to 1062 Western Courier. Some glue marks where the name and number plates have been fitted. Runs OK in both directions. Original box in reasonable condition considering its age. Add to cart
Mainline class 42 Warship – 3D printed replacement wheel / axle insulators £5.00 This listing is for a set of 4 replacement wheel to axle insulators for a Mainline class 42 warship. There are 4 on the loco, one on each axle, when changing the final drive gears, it is not uncommon for these to be stuck on the axle after wheel removal, and for them to break when you try and remove them. We made these following a request from a customer who had broken one. As we have made it already, we are listing it in case other people have broken them. Add to cart
Mainline class 42 Warship – 3D printed replacement wheel centre £1.50 This listing is for 1 x replacement wheel centre for a Mainline class 42 warship. There are 8 on the loco, order as many as you need, you’ll only be charged letter postage at cost for delivery. We made these following a request from a customer who had lost one. As we have made it already, we are listing it in case other people have them missing. Add to cart
Mainline Class 45 (Peak) Intermediate drive gear £6.75 This listing is for a pair of 3D printed replacement gears for the Mainline Class 45 Peak. Add to cart
Replacement axle and gear set for Bachmann J72 split chassis steam locomotives £8.75 3D printed replacement axles and gear for the no longer available Bachmann J72 split chassis locomotives. New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running. These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly. Add to cart
Replacement axle and gear set for Bachmann split chassis steam locomotives £8.75 Rated 5.00 out of 5 3D printed replacement axles and gear for the no longer available Bachmann split chassis steam locomotives. New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running. These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle These axles were fitted to many different early Bachmann split chassis steam loco’s. We know they were fitted to V1, A4 and 43xx Mogul, but it is not possible to come up with a definitive list as there are so many variants. To check your loco, please remove and separate one wheel set. If the centre axle pin is square and approximately 2.05 x 2.05mm , the outer diameter of the gear is approximately 14.7mm and it has 28 teeth, these gears will fit. For smaller 0-6-0 locos, please see our other listings. Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly. Add to cart
Replacement axle and gear set for Bachmann split chassis steam locomotives – round axle pin £8.75 3D printed replacement axles and gear for the no longer available Bachmann split chassis steam locomotives. New revised tooth geometry. We have re-engineered the gear to overcome some of the 3D printing process limitations, and the gear now meshes with the worm drive much better and gives improved running. These parts have been reverse engineered from the original Bachmann parts and are 3D resin printed. Each set comprises of 2 plain axles and 1 gear axle These axles were fitted to several different very early Bachmann split chassis steam loco’s. Note: You will need a back to back gauge to correctly set the wheels on the axles, and you will need to correctly quarter the wheels to ensure the connections rods and cylinders function correctly. Add to cart
ViTrains Class 37 coupling dropper – 3D printed replacement £4.00 A pair of resin 3D printed replacement coupling droppers to fit a ViTrains class 37 Add to cart
ViTrains V2030 Class 37 D6916 “Great Eastern” BR Green – DCC fitted – Used £80.00 From my personal collection. ViTrains class 37 in BR green, DCC fitted (set to No3). Original box and accessory pack included as well as instruction sheet Faults Weathered poorly but recoverable One horn missing One coupling hook missing Add to cart