Showing 1–16 of 17 results
These 4mm scale (OO, EM or P4 gauge) 3D resin printed iron railing posts are printed with a 0.7mm hole through each ball to take a fine wire as a railing. Supplied in a strip of 5 ready for painting, the distance between the balls is 8mm (2 scale feet) and there is adequate material on the bottom of each post to insert into a hole in your baseboard. Add that additional realism to your model with the accurate scale model.
3D resin printed straight Ballustrade in 4mm scale, suitable for OO, EM or P4 gauge model railways. Each section is 75mm in length ready for painting by the customer
Out Of Stock
Out Of Stock
Out Of Stock
3D resin printed station canopy to building support. Listed individually to give maximum flexibility for your station size.
3D printed station canopy support modelled on those found on Torquay and Teignmouth station. Listed individually to give maximum flexibility depending on your station size
Out Of Stock
3D resin printed Station canopy support modelled on those found on Torquay and Teignmouth station. I have listed these indiviually to give maximum flexibility to buyers depending on the size of their station.
Out Of Stock
3D resin printed GWR station canopy support post only, wither with or without upper extension. Listed individually to give maximum flexibility for your station size. Please specify when ordering whether you want the top extension pole or not.
Out Of Stock
A set of 5 lengths of 3D printed platform edge stips plain. No without tactile paved surface to suite steam era modelling. Each strip is 196mm long and can be used in conjunction without our platform face and ramp strips. Cut to length to suit any platform length. For straight platforms only. 1.5mm thick to make the required 18mm platform height when combined with out facing strips to suite code 100 track.
Out Of Stock
A set of 5 lengths of 3D printed platform edge stips with tactile paved surface to suite modern day platforms. Each strip is 196mm long and can be used in conjunction without our platform face and ramp strips. Cut to length to suit any platform length. For straight platforms only. 1.5mm thick to make the required 18mm platform height when combined with out facing strips to suite code 100 track.
Out Of Stock
A set of 5 lengths of 3D printed platform edge stips without the tactile paved surface to suite 1960-90’s style modelling. Each strip is 196mm long and can be used in conjunction without our platform face and ramp strips. Cut to length to suit any platform length. For straight platforms only. 1.5mm thick to make the required 18mm platform height when combined with out facing strips to suite code 100 track.
Out Of Stock
A pair (1 LH and 1 RH as the picture shows) of platforms ramp facing stripsto take our platform edge stips. Each ramp is 75mm long and has a straight section of 125mm making 200mm length in total. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 3 stepped layers. These can be used in conjunction with our platform face strips and can be cut to the required length to suit any platform length. 18.5mm tall making the required platform height for code 100 track.
Out Of Stock
A pair (1 LH and 1 RH as the picture shows) of platforms ramp facing strips with brick top. Each ramp is 75mm long and has a straight section of 125mm making 200mm length in total. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 2 stepped layers and a brick platform edge. These can be used in conjunction with our platform face strips and can be cut to the required length to suit any platform length. 17.5mm tall making the required platform height for code 75 track.
Out Of Stock
A set of 5 brick faces for platforms. Each piece is 200mm long and can be linked together to form a 1000mm platform face. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 3 stepped layers at the top to take the plaform face. These can be used in conjunction with our platform face ramps and platform edge strips and can be cut to the required length to suit any platform length. 16.5mm tall to take our 1.5mm thick platform edges making the required 18mm platform height for code 100 track.
Out Of Stock
A set of 5 brick faces for platforms. Each piece is 200mm long and can be linked together to form a 1000mm platform face. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 2 stepped layers and a brick platform edge. These can be used in conjunction with our platform face ramps and can be cut to the required length to suit any platform length. 17.5mm tall making the required platform height for code 75 track.
Out Of Stock