Hornby Schools – 3D printed replacement gear Hornby part No X9940
£5.00This listing is for a single 3D resin printed replacement gear to fit a Hornby Schools. Part number X9940 on the locomotive service sheet.
Showing 65–80 of 101 results
Hornby T9 – 3D printed replacement intermediate gear
£4.50This listing is for a single 3D resin printed replacement intermediate gear to fit a Hornby T9. Part of item 16 (X9960) on the locomotive service sheet, the original is made of brass. You will need to re-use the original 2mm diameter shaft and smaller side gear from your locomotive.
If you need the small gear as well, we can supply this too.
Hornby T9 – 3D printed replacement intermediate gear – double gear
£7.75This listing is for a single 3D resin printed replacement intermediate gear to fit a Hornby T9. Part of item 16 (X9960) on the locomotive service sheet. You will need to re-use the original 2mm diameter. This is 2 separate gears that become one combined gear when fitted onto your existing 2mm shaft.
Hornby T9 – 3D printed replacement intermediate gear – small side gear
£3.50This listing is for a single 3D resin printed replacement intermediate gear to fit a Hornby T9. Part of item 16 (X9960) on the locomotive service sheet. You will need to re-use the original 2mm diameter shaft and larger gear from your locomotive.
If you need the larger gear as well, we can supply this too.
Out Of Stock
Lima Class 52 Western – blue – renumbered and named as 1019 Western Challenger
£30.00Lima class 52 blue, originally 1071, renumbered and named to 1019 Western Challenger. Runs OK in both directions. Original box in reasonable condition considering its age.
Lima Class 52 Western – blue – renumbered and named as 1062 Western Courier
£30.00Lima class 52 blue, originally 1071, renumbered and named to 1062 Western Courier. Some glue marks where the name and number plates have been fitted. Runs OK in both directions. Original box in reasonable condition considering its age.
Out Of Stock
Mainline class 42 Warship – 3D printed replacement wheel / axle insulators
£5.00This listing is for a set of 4 replacement wheel to axle insulators for a Mainline class 42 warship. There are 4 on the loco, one on each axle, when changing the final drive gears, it is not uncommon for these to be stuck on the axle after wheel removal, and for them to break when you try and remove them. We made these following a request from a customer who had broken one. As we have made it already, we are listing it in case other people have broken them.
Out Of Stock
Mainline class 42 Warship – 3D printed replacement wheel centre
£2.50This listing is for 1 x replacement wheel centre for a Mainline class 42 warship. There are 8 on the loco, order as many as you need, you’ll only be charged letter postage at cost for delivery. We made these following a request from a customer who had lost one. As we have made it already, we are listing it in case other people have them missing.
Mainline Class 45 (Peak) Final Drive Gear
£6.75This listing is for a pair of 3D printed replacement final drive gears for the Mainline Class 45 Peak.
Mainline Class 45 (Peak) Intermediate drive gear
£6.75This listing is for a pair of 3D printed replacement gears for the Mainline Class 45 Peak.
Out Of Stock
Platform edge strips plain slabs to suite steam era platforms
£10.00A set of 5 lengths of 3D printed platform edge stips plain. No without tactile paved surface to suite steam era modelling. Each strip is 196mm long and can be used in conjunction without our platform face and ramp strips. Cut to length to suit any platform length. For straight platforms only. 1.5mm thick to make the required 18mm platform height when combined with out facing strips to suite code 100 track.
Out Of Stock
Platform edge strips with tactile surface for modern day platforms
£10.00A set of 5 lengths of 3D printed platform edge stips with tactile paved surface to suite modern day platforms. Each strip is 196mm long and can be used in conjunction without our platform face and ramp strips. Cut to length to suit any platform length. For straight platforms only. 1.5mm thick to make the required 18mm platform height when combined with out facing strips to suite code 100 track.
Out Of Stock
Platform edge strips without tactile surface for 1960-90s style platforms
£10.00A set of 5 lengths of 3D printed platform edge stips without the tactile paved surface to suite 1960-90’s style modelling. Each strip is 196mm long and can be used in conjunction without our platform face and ramp strips. Cut to length to suit any platform length. For straight platforms only. 1.5mm thick to make the required 18mm platform height when combined with out facing strips to suite code 100 track.
Out Of Stock
Platform facing brick ramp strips
£5.00A pair (1 LH and 1 RH as the picture shows) of platforms ramp facing stripsto take our platform edge stips. Each ramp is 75mm long and has a straight section of 125mm making 200mm length in total. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 3 stepped layers. These can be used in conjunction with our platform face strips and can be cut to the required length to suit any platform length. 18.5mm tall making the required platform height for code 100 track.
Out Of Stock
Platform facing brick ramp strips – brick top
£5.00A pair (1 LH and 1 RH as the picture shows) of platforms ramp facing strips with brick top. Each ramp is 75mm long and has a straight section of 125mm making 200mm length in total. These strips are flexible and can be used on straight or curved platforms. These are not intended to be structual parts of your platform. These are to face your wooden, card or foam board platform. The stips feature brick work in the English bond as used on the railway with 2 stepped layers and a brick platform edge. These can be used in conjunction with our platform face strips and can be cut to the required length to suit any platform length. 17.5mm tall making the required platform height for code 75 track.