3D printed – “CORNISH RIVIERA EXPRESS” Headboard sign in 4mm scale – unpainted £3.00 3D printed unpainted headboard sign – 4mm. This sign is printed “CORNISH RIVIERA EXPRESS”. Other text and scales are available, please contact us to discuss your bespoke requirements. We can also make any design of sign you require, just email us (info@asis3d.co.uk) with a photo or dimensioned sketch of what you are looking for. Add to cart
3D printed coupling dropper / drawbar to fit Bachmann Mk 1 coaches £3.90 The NEM pocket on Bachmann Mk 1 coaches is too high and requires a stepped tension hook coupling. This limits the possibilities for other couplings such as KADEE couplings without some modification to either the coach or using a KEEN system drawbar, which is not perfect as the NEM coupling pocket is open and needs to be closed by glueing a piece of plasticard over the recess. These coupling dropper / drawbars overcome both the positional error of the NEM pocket, and have a fully formed NEM pocket, so pop them in and you can fit your choice of coupling straight in. Price is for a pair of droppers / drawbars. Add to cart
3D printed coupling dropper / drawbar to fit Bachmann Mk 2 coaches £3.90 The NEM pocket on Bachmann Mk 2 coaches is too high and requires a stepped tension hook coupling. This limits the possibilities for other couplings such as KADEE couplings without some modification to either the coach or using a KEEN system drawbar, which is not perfect as the NEM coupling pocket is open and needs to be closed by glueing a piece of plasticard over the recess. These coupling dropper / drawbars overcome both the positional error of the NEM pocket, and have a fully formed NEM pocket, so pop them in and you can fit your choice of coupling straight in. Price is for a pair of droppers / drawbars. Add to cart
3D Printed replacement Bachmann split chassis axle x 2 £3.10 3D printed replacement Bachmann split chassis locomotive axles only for those that do not want the replacement gear as well. This listing is for 2 axles. Add to cart
3D Printed replacement final drive gears for Mainline Warship £6.75 3D printed replacement final drive gear set (2 gears) to fit the Mainline Warship. You will notice the original Mainline final drive gear was a double gear. The smaller diameter gear is not used in the final drive application and so, for simplicity, we have omitted the smaller gear from our replacement. Please note, these have been endurance tested without lubrication, please do not lubricate as the lubricant used may affect the material. Designed to be a push fit on the axle, Mainline did not provide either a positive location or spline to stop the gear rotating on the axle. Once the correct position of the gear on the axle has been determined, we recommend bonding in place with a small amount of super glue. Add to cart
3D printed replacement for the Triang class 31 and 37 traction magnet £3.00 3D printed replacement for the Triang class 31 (A1A-A1A) and class 37 traction magnets. With nickel silver rails, the traction magnets no longer aid traction, and cause the wheel sets to pull over to one side. Replacing the magnets with our 3D resin printed alternatives will allow the locomotive to run with centred wheels, while maintaining the other function of the magnet, holding the armature bearings in place and allowing improved low speed running of these old locomotives. Price is for a pair. Add to cart
3D printed replacement for the Triang class 35 Hymek traction magnet £3.00 3D printed replacement for the Triang class 35 Hymek traction magnets. With nickel silver rails, the traction magnets no longer aid traction, and cause the wheel sets to pull over to one side. Replacing the magnets with our 3D resin printed alternatives will allow the locomotive to run with centred wheels, while maintaining the other function of the magnet, holding the armature bearings in place and allowing improved low speed running of these old locomotives. Price is for a pair. Add to cart
3D printed replacement Tender Air vent to fit Lima Hughes Crab loco tender £1.50 3D printed Tender detailing part for a Lima LMS / BR Hughes Crab locomotive tender. This is the tender vent that is often missing from these older locos. The part measures 12mm long. Add to cart
3D printed Station Platform Trolley 4mm scale £4.50 Unpainted station platform trolley. No assembly required, listing is for 2 trolleys. 3D resin printed for extra fine detail which injection moulded and white metal kits simply cannot compete with. This trolley is based on a GWR trolley, but will also suit diesel era layouts up to and including the 1980’s. Add to cart
4mm scale (OO, EM or P4 gauge) “SW” 3D printed sign £1.50 Rated 5.00 out of 5 A 3D printed sign ready for painting by the customer showing the lettering “SW”. Add to cart
4mm scale (OO, EM or P4 gauge) 3D printed “Whistle” sign £1.75 Rated 5.00 out of 5 A 3D printed sign ready for painting by the customer with the wording “Whistle” on it. Add to cart
4mm scale (OO, EM or P4 gauge) 3D resin printed iron railing posts £2.00 These 4mm scale (OO, EM or P4 gauge) 3D resin printed iron railing posts are printed with a 0.7mm hole through each ball to take a fine wire as a railing. Supplied in a strip of 5 ready for painting, the distance between the balls is 8mm (2 scale feet) and there is adequate material on the bottom of each post to insert into a hole in your baseboard. Add that additional realism to your model with the accurate scale model. Add to cart
4mm scale (OO, EM, P4 gauge) straight 3D printed Balustrade 75mm long £4.25 3D resin printed straight Ballustrade in 4mm scale, suitable for OO, EM or P4 gauge model railways. Each section is 75mm in length ready for painting by the customer Add to cart
4mm scale GWR style milepost – set of 4 £4.00 A set of four bespoke GWR style mileposts 3D resin printed and unpainted. Chose the milepost you require and receive the full mile, quarter, half and three quarter milepost to go with it. Please specify the mileage required when ordering. Add to cart